Hardwood refinishing & sanding in Talty, TX

Two things. First, the whole order comes from a single dye lot and gets racked and blended as we install, so there's no visible batch change halfway across the room. Second, the slab gets flattened properly before we start, grinding highs, filling lows, because on a Talty-sized floor a gentle wave in the concrete reads as a shadow line under raking light from the windows.

We'd usually talk you out of it. Talty houses are slab-on-grade on Houston Black clay, and solid wood on slab has to be installed over a plywood layer, which raises the floor height and still reacts to the seasonal moisture swing. Engineered wood gives you the same real wood surface with far more dimensional stability. If your heart is set on solid, we'll explain exactly what it takes first.

Our own installers. All About Floors has been doing this for 30 years, the core crew has been together for 20, and we have never subcontracted an installation to anyone. Labor carries a one-year warranty. On a house the size of most Talty builds, the install runs several days, and it's the same faces in your home each of those days rather than a rotating subcontract crew.

You can, but the seam will show. The same species from the same era darkens at a different rate depending on light, and a fresh finish beside a fifteen-year-old one reads as new against old no matter how the stain is matched. Where a room closes off with a door, we stop cleanly at a threshold. Across an open plan, do the whole field.

Most families stay. With a waterborne finish the odor is mild and clears quickly, and we sequence the work so there is a path to a bedroom and a bathroom. Oil-modified finish is a different story: the smell is strong for several days, and households with infants or birds usually leave. Pets have to be out of the work area entirely, since paw prints in a curing finish are permanent.

Yes, within what the species allows. Red oak carries a pink undertone that fights gray stains, maple and birch blotch unless they are conditioned or water-popped first, and no stain makes a floor lighter than its own bare wood. We sand a section of your floor and lay candidate stains on it, because a sample board of someone else's oak tells you very little.