Stairs & trim in Combine, TX
Stairs and trim are the last ten percent of a flooring job and the first thing anyone looks at. A stair nosing sits at eye level and repeats the whole way up a flight, and a transition strip lands exactly where a foot meets it. We handle treads, risers, nosings, baseboard, shoe and the joints between rooms that finish at different heights. Installed by our own crew across Combine.
Stairs & trim done right, the first time, in Combine.
Homeowners across Combine, TX call All About Floors for stairs & trim because every job runs with our own crew, no subcontractors, no surprise charges, and one number to call from first sample to finished floor.
We install stairs & trim across Combine and the surrounding area, including Crandall, Heartland, Talty, Forney.
What's included
- Stair nosings ordered from the same product line as the floor
- Retread caps over sound existing treads
- Full tread and riser replacement where framing has moved
- Loose framing screwed and shimmed before anything is covered
- Baseboard, shoe moulding and quarter round installed and finished
- Reducers, T-moldings and thresholds between floors of different heights
- Carpet terminated behind a nosing at landings and stair tops
Built for Combine homes.
Combine is not laid out like the master-planned side of Kaufman County. It's about seven square miles at the FM 1389 and FM 3039 crossing, split across the Dallas and Kaufman county line, and it still reads as fully rural at roughly 377 people per square mile. Houses sit back on acreage down long drives, mixed in with manufactured homes, and the names you'll hear are Bent Tree Estates, River Bend Estates and Willow Bend Estates rather than any builder's community.
The settlement here dates to the late 1880s or early 1890s and had a post office from 1895 to 1903. For decades it barely registered, fewer than 25 people through the 1930s and 40s, 297 by 1970. Residents incorporated in the 1970s specifically because Seagoville was expanding around them, and that decision is why Combine still looks the way it does today rather than becoming another stretch of subdivision. Population reached 2,245 at the 2020 census.
The housing follows from the land. Density is around 377 people per square mile across roughly seven square miles, and the town issues single digits to mid-teens of new building permits in a typical year. What that produces is a genuine mix: one-off custom houses on multi-acre tracts, older ranch-style homes, and a substantial share of manufactured housing. The 2024 figures make the split obvious, detached houses averaging around $464,000 against manufactured homes around $142,000. Those are two completely different flooring jobs in the same ZIP code.
On the custom builds, the challenge is scale and continuity. Big open rooms mean long uninterrupted plank runs, which means ordering from one dye lot and getting the slab genuinely flat before starting, because a wave that's invisible in a hallway shows plainly across thirty feet. On manufactured homes the challenge is the deck: original particleboard or thin OSB subfloor that has usually taken water damage around the tub, toilet or entry door, and has to be cut out and replaced before any new surface goes over it.
Practical Combine details matter too. Gravel and dirt drives mean grit tracked indoors year-round, so we push people toward harder wear layers and away from soft finishes at entries. Properties out toward the East Fork bottomland near the John Bunker Sands Wetland Center sit in damper air, which argues for engineered rather than solid wood. And since deliveries have to reach the house, we check truck access down the drive before we schedule.
Stairs & trim jobs near Combine
What homeowners say
"All About Floors is amazing to work with! We recently had our entire flooring replaced and they not only did a wonderful job, the support and aftercare has been top notch! Highly recommend"
J Shoe2 · via Google "The team at All About Floors did an absolutely phenomenal job repairing a portion of a floor in my clients' home that nobody else would touch. We are so grateful for Patty and her amazing team!"
Carley Newlin · via Google
Stairs & trim in Combine, questions
We have a manufactured home in Combine. Do you work on those?
Yes, and the subfloor is usually the real job. Manufactured homes are decked in particleboard or thin OSB that swells permanently once it gets wet, so soft spots around the tub, toilet or back door have to be cut out and replaced with proper sheet material before anything new goes down. Skip that step and the new floor telegraphs every weak patch within a year.
We're on several acres off FM 1389. Will you actually come out here for an estimate?
We will. Combine is one of our closest towns, our showroom is at 10 Mustang Court in Forney, a short run up the road. The estimate is free and we bring samples to the house so you can see them in your own light. We'll also check that a delivery truck can get down the drive, which matters more out here than people expect.
What holds up in a country house with dogs and a gravel driveway?
Grit is what kills floors out here, not water. Sand tracked in off a gravel drive acts like sandpaper underfoot, so we steer toward a thicker wear layer, a rigid-core LVP or a tile with a harder surface rating, rather than a soft-finished wood at entries and traffic lanes. Pair it with a decent mat at every exterior door and you'll double the life of the floor.
Can you match stair nosings to flooring already in my house?
Usually, if the product can be identified. Bring us a spare plank or a photo of the carton and we look for a nosing from the same line first. If it has been discontinued, a stain grade nosing finished on site gets closer than a stock profile in a similar color. We would rather say a true match is not achievable than install one that reads wrong on every step.
How long does a staircase take, and can we use the stairs while you work?
Most residential flights run two to three days once material is on hand, and the stairs are out of service for part of that. In a two story house with one staircase we sequence the work so the flight is walkable overnight, or split it and do half at a time. Tell us at the estimate if someone in the household cannot manage a detour.
Do the risers have to match the treads?
No, and most people choose not to. White painted risers under a stained tread is the standard look in newer Dallas area homes and it ties the staircase back to the baseboard and casing already in the house. Matching stained risers give a darker, more solid result. Decide before the treads go down, because cutting paint in cleanly around finished treads is slow work.
Flexible financing available
Wisetack and Synchrony
Every floor type we install in Combine, TX
-
CombineHardwood installation in Combine
Solid and engineered hardwood installed over slab and pier-and-beam homes in Forney, Kaufman and Rockwall counties and the wider Dallas metro.
Learn more → -
CombineHardwood refinishing & sanding in Combine
Sanding and refinishing existing hardwood floors across Forney, Kaufman and Rockwall counties, starting with an honest read on whether yours can be saved.
Learn more → -
CombineLuxury vinyl plank (LVP) in Combine
Luxury vinyl plank installed over slab in Forney, Rockwall and the Dallas metro, with the slab prep that keeps a floating floor tight and quiet.
Learn more → -
CombineLaminate in Combine
Laminate flooring installed across Forney, Kaufman and Rockwall counties, with straight answers on AC ratings and the rooms it does not belong in.
Learn more → -
CombineTile in Combine
Porcelain, ceramic and natural stone tile set over properly prepped slabs in Forney and across the Dallas metro. Free in-home samples.
Learn more → -
CombineCarpet in Combine
Carpet and pad for bedrooms, stairs and upstairs living areas, measured, seamed and power stretched throughout Forney and Kaufman County.
Learn more →
Stairs & trim in nearby areas
Ready to start your Combine project?
Free in-home estimate, clear pricing, and a crew that shows up when we say we will.
