Stairs & trim in Talty, TX
Stairs and trim are the last ten percent of a flooring job and the first thing anyone looks at. A stair nosing sits at eye level and repeats the whole way up a flight, and a transition strip lands exactly where a foot meets it. We handle treads, risers, nosings, baseboard, shoe and the joints between rooms that finish at different heights. Installed by our own crew across Talty.
Stairs & trim done right, the first time, in Talty.
Homeowners across Talty, TX call All About Floors for stairs & trim because every job runs with our own crew, no subcontractors, no surprise charges, and one number to call from first sample to finished floor.
We install stairs & trim across Talty and the surrounding area, including Heartland, Crandall, Forney, Terrell.
What's included
- Stair nosings ordered from the same product line as the floor
- Retread caps over sound existing treads
- Full tread and riser replacement where framing has moved
- Loose framing screwed and shimmed before anything is covered
- Baseboard, shoe moulding and quarter round installed and finished
- Reducers, T-moldings and thresholds between floors of different heights
- Carpet terminated behind a nosing at landings and stair tops
Built for Talty homes.
Talty's comprehensive plan sets every residential lot at one acre, requires a minimum 2,000 square feet of dwelling, and calls for 90% brick on the first floor on all four sides. That ordinance produced a particular kind of house, large, brick, well spaced, and mostly built since the farmland started selling to developers around 2000. The town sits at Interstate 20 and FM 1641 in Forney ISD, and locals still give directions off St. Martin's Church and the old gin property.
Talty was legally established when deeds were filed on March 27, 1874, but it did not incorporate until 1999 and only became a city in 2015. Irish Catholic families settled the area, the Laydens, Vaughans and O'Connors among them, and it was known first as Layden's Ridge, later Irish Ridge. The Catholic congregation built St. Martin's Church in 1891. Cotton paid the bills for generations, worked off a gin at the corner of FM 1641 and FM 148; the town's own plan describes fields that turned bright white every fall on black land that gave high yields. Population went from 1,028 in 2000 to 2,500 in 2020 and an estimated 3,048 by 2023.
That farmland sold to developers, and the town wrote rules about what could replace it. R-1 zoning requires one-acre lots with a 150-foot minimum width, 75-foot front setbacks, and no dwelling under 2,000 square feet. The result is Shamrock Ridge, Winners Circle off Exit 493, Founders Place, Hunters Green Estates and the rest, large brick houses on generous acreage rather than the tight tract product a few miles west in Forney.
For flooring, size changes the job. A 2,500 to 4,000 square foot single-story means long continuous runs with very few walls to break them, so everything gets ordered from one dye lot and the slab has to be genuinely flat before the first plank. Waves that disappear in a small house are visible across a Talty great room. It also means a bigger material order and a longer install, which is why having the same crew on the job from start to finish matters, ours has been together twenty years and we have never subcontracted a job out.
The black land that grew the cotton is Houston Black clay, a Vertisol that swells wet and shrinks dry through the season. On these slabs we leave proper expansion at every perimeter, use crack-isolation membrane under tile, and tell owners to keep a soaker hose running at the foundation through the worst of the summer.
Stairs & trim jobs near Talty
What homeowners say
"All About Floors is amazing to work with! We recently had our entire flooring replaced and they not only did a wonderful job, the support and aftercare has been top notch! Highly recommend"
J Shoe2 · via Google "The team at All About Floors did an absolutely phenomenal job repairing a portion of a floor in my clients' home that nobody else would touch. We are so grateful for Patty and her amazing team!"
Carley Newlin · via Google
Stairs & trim in Talty, questions
We have close to 3,000 square feet in one continuous run. How do you keep it looking right?
Two things. First, the whole order comes from a single dye lot and gets racked and blended as we install, so there's no visible batch change halfway across the room. Second, the slab gets flattened properly before we start, grinding highs, filling lows, because on a Talty-sized floor a gentle wave in the concrete reads as a shadow line under raking light from the windows.
Can we put solid hardwood down on our slab?
We'd usually talk you out of it. Talty houses are slab-on-grade on Houston Black clay, and solid wood on slab has to be installed over a plywood layer, which raises the floor height and still reacts to the seasonal moisture swing. Engineered wood gives you the same real wood surface with far more dimensional stability. If your heart is set on solid, we'll explain exactly what it takes first.
Who does the work, and what happens if something goes wrong after?
Our own installers. All About Floors has been doing this for 30 years, the core crew has been together for 20, and we have never subcontracted an installation to anyone. Labor carries a one-year warranty. On a house the size of most Talty builds, the install runs several days, and it's the same faces in your home each of those days rather than a rotating subcontract crew.
Can you match stair nosings to flooring already in my house?
Usually, if the product can be identified. Bring us a spare plank or a photo of the carton and we look for a nosing from the same line first. If it has been discontinued, a stain grade nosing finished on site gets closer than a stock profile in a similar color. We would rather say a true match is not achievable than install one that reads wrong on every step.
How long does a staircase take, and can we use the stairs while you work?
Most residential flights run two to three days once material is on hand, and the stairs are out of service for part of that. In a two story house with one staircase we sequence the work so the flight is walkable overnight, or split it and do half at a time. Tell us at the estimate if someone in the household cannot manage a detour.
Do the risers have to match the treads?
No, and most people choose not to. White painted risers under a stained tread is the standard look in newer Dallas area homes and it ties the staircase back to the baseboard and casing already in the house. Matching stained risers give a darker, more solid result. Decide before the treads go down, because cutting paint in cleanly around finished treads is slow work.
Flexible financing available
Wisetack and Synchrony
Every floor type we install in Talty, TX
-
TaltyHardwood installation in Talty
Solid and engineered hardwood installed over slab and pier-and-beam homes in Forney, Kaufman and Rockwall counties and the wider Dallas metro.
Learn more → -
TaltyHardwood refinishing & sanding in Talty
Sanding and refinishing existing hardwood floors across Forney, Kaufman and Rockwall counties, starting with an honest read on whether yours can be saved.
Learn more → -
TaltyLuxury vinyl plank (LVP) in Talty
Luxury vinyl plank installed over slab in Forney, Rockwall and the Dallas metro, with the slab prep that keeps a floating floor tight and quiet.
Learn more → -
TaltyLaminate in Talty
Laminate flooring installed across Forney, Kaufman and Rockwall counties, with straight answers on AC ratings and the rooms it does not belong in.
Learn more → -
TaltyTile in Talty
Porcelain, ceramic and natural stone tile set over properly prepped slabs in Forney and across the Dallas metro. Free in-home samples.
Learn more → -
TaltyCarpet in Talty
Carpet and pad for bedrooms, stairs and upstairs living areas, measured, seamed and power stretched throughout Forney and Kaufman County.
Learn more →
Stairs & trim in nearby areas
Ready to start your Talty project?
Free in-home estimate, clear pricing, and a crew that shows up when we say we will.
